Fioroni's hard anodized aluminum Lightweight Inertial Components, LIC for short, increase your car's performance by reducing rotating weight allowing for better acceleration and deceleration, increased run time, and better handling.
   
   

LIC Wheel Hub 0 Off-Set 12gr Lighter (Fits 3mm Pin) (4 pcs)

Fioroni's LIC wheel hubs are as functional as they are aesthetic. Three mounting positions are possible at 0.1mm increments to eliminate or reduce the need for shims between the bearing and hub. On the average the set is 12 grams lighter and will fit virtually all 1/8th off road vehicles with 3mm axle pins. Hard anodized for long wear.        Part OT-LIC01
   

LIC Wheel Hub 1mm Off-Set 12gr Lighter (Fits 3mm Pin) (4 pcs)

Identical to OT-LIC01, these aluminum hubs are 1mm wider each for increased width/scrub angle. Three mounting positions are possible at 0.1mm increments to eliminate or reduce the need for shims between the bearing and hub. On the average the set is 12 grams lighter and will fit virtually all 1/8th off road vehicles with 3mm axle pins.  Part OT-LIC02
   

LIC "Grip" Wheel Nut Blue (4pcs) 6gr Lighter

These beautifully machined lightweight aluminum wheel nuts have a beveled inside surface that literally digs into the wheel for a secure fit. No nylok material to wear out these nuts will last longer and reduce rotating weight.

Part OT-LIC03
   

LIC Adjustable Wheel Hub for MP9 TKI2 12gr Lighter (4 pcs)

This set is made specially for the Kyosho MP9 series. Three mounting positions are possible at 0.1mm increments to eliminate or reduce the need for shims between the bearing and hub.

Part OT-LIC04
   

LIC Mugen Pinion Couplers (2 pcs) 14gr Lighter

Mugen MBX5 center driveshaft couplers. These weigh about half the stock steel couplers.

Part OT-LIC11

 
   

LIC Mugen Driveshaft Axles (4 pcs) 24gr Lighter

Made to fit the MBX5 and MBX5 compatible buggies, these axles replace the stock steel units for weight savings.

Part OT-LIC12

 
   

LIC Mugen MBX6 Driveshaft Axles (4 pcs) 24gr Lighter

Made to fit the MBX6 and MBX6 compatible buggies, these axles replace the stock steel units for weight savings.

Part OT-LIC13

 

 
   

LIC Mugen MBX6 CVD Dogbone (2pcs) 11gr Lighter

These lightweight aluminum front/rear driveshafts reduce weight allowing for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC14

 

 

 
   

LIC Mugen MBX6 Center CVD Dogbone Set (2) 11gr Lighter

These lightweight aluminum center driveshafts reduce weight allowing for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC15

 

 

   

LIC Associated RC8 Pinion Couplers (2 pcs) 12gr Lighter

Associated RC8 center driveshaft couplers. These weigh about half the stock steel couplers.

Part OT-LIC16

 

 

 
   

LIC Associated RC8 Driveshaft Axles (4 pcs) 24gr Lighter

Made to fit the RC8 and RC8 compatible vehicles, these axles replace the stock steel units for weight savings.

Part OT-LIC17

 

 

 

   

LIC Mugen MBX6 110mm Rear Center CVD Dogbone (Fits Long Chassis)

Made to fit the Mugen MBX6 EU or long chassis kits, this shaft replace the stock steel rear center shaft for rotational weight savings.

Part OT-LIC18

 

 

 

   

LIC Losi 8ight Pinion Couplers (2pcs) 12gr Lighter

Losi 8 center driveshaft couplers. These weigh about half the stock steel couplers and will spool up much quicker.

Part OT-LIC21

 

 

   

LIC Losi 8ight Driveshaft Axles (4 pcs) 24gr Lighter

Made to fit the Losi 8 and Losi 8 compatible vehicles, these axles replace the stock steel units for weight savings.

Part OT-LIC22

 

 

 
   

LIC GS Cl-1 ADV Driveshaft Axles (4 pcs) 32gr Lighter

Lightweight axles for the GS Racing CL-1 Advanced buggy.

 

Part OT-LIC28

 

   

LIC XRAY XB808 Driveshaft Axles (4 pcs) 32gr Lighter

Part OT-LIC32

 

 

 

PHOTO AND PRODUCT DETAILS COMING SOON
   

LIC Kyosho MP9 Center CVD Complete Set (2) 20gr Lighter

Complete set of center lightweight universals for the MP9. Reduced weight allows for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC34

   

LIC Kyosho MP9 CVD Complete Set (2) 22gr Lighter

Complete set of front/rear lightweight universals for the MP9. Reduced weight allows for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC35

 

 

   

LIC Kyosho MP9 CVD Dogbone (2pcs) 12gr Lighter

Front/rear lightweight replacement dogbones for OT-LIC35 (MP9).

Part OT-LIC36

 

 

   

LIC Kyosho MP9 Driveshaft Axles (2 pcs) 10gr Lighter

Front/rear lightweight replacement axles for OT-LIC35 (MP9).

Part OT-LIC37

 

 

   

LIC CVD Spare Pin, Screw, Coupler Set

This is a replacement set for all the Fioroni LIC universal driveshaft kits. This will also replace the stock pieces in most buggies and truggies. Pin and coupler are made of steel.

Part OT-LIC38

 

 

   

LIC Hot Bodies D8 CVD Complete Set (2) 22gr Lighter

Complete set of front/rear lightweight universals for the D8. Reduced weight allows for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC40

 

 

   

LIC Hot Bodies D8 CVD Dogbone (2) 22gr Lighter

Pair of front/rear lightweight cv dogbones for the D8. Reduced weight allows for improved acceleration and better handling. These can be used with the Fioroni CV axles or with the original D8 components.

Part OT-LIC41

 

 
   

LIC Hot Bodies D8 Driveshaft Axles (2 pcs) 12gr Lighter

Pair of front/rear lightweight axles for the D8. Reduced weight allows for improved acceleration and better handling. These can be used with the Fioroni CV dogbones or with the original D8 components.

Part OT-LIC42

   

LIC D8/CL1/CLX CVD Spare Pin, Screw, Coupler Set

This is a replacement set for the Fioroni LIC D8, Cl1, and CLX driveshaft kits. This will also replace the stock pieces in the same buggies and truggies. Pin and coupler are made of steel.

Part OT-LIC45

 

 

   

LIC GS CLX Pinion Couplers (2pcs) 12gr Lighter

CLX center driveshaft couplers. These weigh about half the stock steel couplers and will spool up much quicker.

Part OT-LIC46

   

LIC GS CLX Driveshaft Axles (4 pcs) 24gr Lighter

Made for the GS CLX and CLX compatible vehicles, these axles replace the stock steel units for substantial weight savings. Extra cvd pin holes are provided for long term use.

Part OT-LIC47

 

 

   

LIC GS CLX Front CVD Dogbone (2pcs) 14gr Lighter

These lightweight aluminum front drive shafts reduce weight allowing for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC48

 

   

LIC GS CLX Rear CVD Dogbone (2pcs) 14gr Lighter

These lightweight aluminum front drive shafts reduce weight allowing for improved acceleration and better handling. For serious and experienced racers only, these are great for use in qualifying rounds.

Part OT-LIC49

 

   

LIC Durango DNX408 Driveshaft Axles (4 pcs) 20gr Lighter

Made for the DNX408 and 408 series vehicles, these axles replace the stock steel units for substantial weight savings. Extra cvd pin holes are provided for long term use.

Part OT-LIC50